UV DTF Tumbler Wrap, Ready to Transfer, UV DTF Tumbler wraps for 16oz Libbey Glass Can Tumblers
 
** No cup is included in this order**
 
High quality printed UV DTF 16oz Libbey Glass Can Wraps, ready to apply.
 
No need for weeding and layering. Peel, apply, squeegee and voila!Great for small businesses or personal use.Dimensions: 25cm x 12cm
 
Care instructions:
- No microwave
- No dishwashing machine
- NO extreme heat
- DO not soak
 
To apply a UVDTF (Ultra Violet Direct to Film) transfer decal full cup wrap, you will need the following materials:
 
UVDTF transfer decal: This is a special type of decal designed for direct application to cups and other plastic, wooden objects.
1. Clean cloth or sponge: For preparing the cup surface and removing any dust or debris.
2. Spray alcohol: To clean the cup surface thoroughly before applying the decal.
3. Scissors: For cutting the decal to the appropriate size.
4. Water: Used in the application process.
5. Cup or container filled with warm water: This will be used to activate the adhesive on the decal.
 
Here's a step-by-step guide to applying a UVDTF transfer decal full cup wrap:
1. Prepare the cup: Start by cleaning the cup surface using a clean cloth or sponge and isopropyl alcohol. Ensure that the surface is free from any dirt, dust, or grease. This step is crucial for proper adhesion of the decal.
2. Cut the decal: Carefully cut the UVDTF transfer decal to the appropriate size, ensuring it will fit around the cup without any overlaps or gaps.
3. Submerge the decal: Fill a cup or container with warm water, deep enough to submerge the decal completely.
4. Activate the decal: Place the decal into the warm water and let it soak for the recommended time specified by the manufacturer. This will activate the adhesive on the decal.
5. Remove the decal from the water: Once the decal is ready, gently remove it from the water, being careful not to touch the adhesive side.
6. Apply the decal: Carefully position the decal around the cup, starting from one end and smoothly wrapping it around the cup's surface. Take your time to ensure it aligns properly and adheres evenly without any air bubbles or wrinkles.
7. Smooth out the decal: Use your fingers or a clean cloth to smooth out the decal, starting from the center and working your way towards the edges. This will help eliminate any trapped air bubbles and ensure a secure bond.
8. Let it dry: Allow the decal to dry completely. The drying time may vary depending on the manufacturer's instructions, so refer to the packaging for specific guidance.
 
DisclaimerWe understand that sometimes color mistakes can happen while using our products. It is important to note that any issues arising due to user error will not be covered or compensated. We recommend that users carefully read and follow all instructions provided to ensure proper use of our products. If you are unsure about any aspect of our products, please do not hesitate to contact us for assistance. We cannot be held responsible for any damages or losses resulting from user error.

We are NOT responsible for any wraps that are applied incorrectly or damaged during application.